#Motorola radio programming software how to#
#Motorola radio programming software software#
#Motorola radio programming software code#
#Motorola radio programming software plus#

Level 3 is the opposite of level 1 and it is highly sensitive. Level 1 is the least sensitive option that is preferred if you are in a loud environment.

#Motorola radio programming software plus#

Now, you can press the plus (+) or minus (-) to adjust the microphone gain between levels 1 to 3.

The letter should blink on the screen right with the face profile icon.

To adjust the microphone gain, you should go into the programming mode and press the menu until the letter вЂњGвЂќ is displayed on the screen.

This is an optional feature in addition to the call tone and the Vibra signal is displayed on the radio if it is turned on. The Vibra call makes your radio to vibrate when it receives the message and you havenвЂ™t transmitted anything in the last 30 seconds. The call tone by default is turned off, but you can change it and transmit this call tone to alert the group. The call tone in a radio helps to alert a group if you want to transmit a message. After selecting the call tones and Vibra call, you can exit from the programming mode. To select the Vibra call, you can select the call tone 8 or 4. You can choose the call tones between 1, 2, 3, 4 for audible sound.

Now, you can press the (+) or (-) button to hear and select the call tone that you need to set.

Then, press the MENU until the CA displays on your radio screen,

You go into the programming mode by pressing and holding the PTT (Push to Talk) and MON button simultaneously.

Programming the call tones and Vibra call With this code, you get to have a clear signal transmission. It reduces these interferences either while transmitting, receiving or on standby.

#Motorola radio programming software code#

The interference eliminator code in a radio helps to filter out the static and unwanted noise to reduce interference while communicating. Finally, you can exit from the programming mode by pressing and holding the PTT button or you can press the MENU button to continue programming.

Now, you can press (-) or (+) to select the number of interference codes that you want on your Motorola radio.

Then, press the menu until the CODE displays on the screen, and the code number flashes. You have to go into the programming mode first by pressing and holding the PTT and MON button simultaneously.

Programming the interference eliminator code is the same as programming channels.

Programming the interference Eliminator code

After you have selected the channels and adjusted the frequency, you can exit from the programming mode by pressing and holding the PTT (Push to Talk) button or continue in the programming mode.

Now, you can press the plus (+) or the minus (-) button to adjust the frequency of the selected channel.

After selecting the channel number, you can change the frequency of it by pressing the menu until the вЂњFREQвЂќ appears on the screen.

The radio will retain the settings for the channels that are made unavailable, but you can go to the setting and make it available anytime you want. You can make available any number of channels that you want in this setting.

Now, press (-) or (+) to select the number of channels that you want.

You can easily select the channel as it is the first setting that is displayed after you enter into the programming mode.

After entering into the programming mode, press the menu button until the channel number flashes.

Selecting available channels and modifying their frequency. Now, you have successfully entered your radio into the programming mode. Then the frequency (FREQ), code (CODE), and channel number will be alternatively displayed on the display. Make sure that you completely hold those two buttons and not press & release.ДЄfter three seconds, you will hear a beep sound from the radio with the PROG sign on the display. Then, hold down the PTT (Push to Talk) and MON button simultaneously for three seconds. First, make sure that your radio is fully charged. It is simple to set your Motorola radio into the programming mode. To set your Motorola Radio into Programming Mode In this post, let us see the steps to get your Motorola radio into the programming mode and customize it.

#Motorola radio programming software how to#

If you are new to using radio and are wondering how to program a Motorola radio, then you have come to the right place. You can change all these settings by placing your radio in the programming mode. The main programmable settings with the Motorola walkie-talkie include its channel, operating frequency configuration, interference eliminator code, call tunes, microphone gain, etc. With the radio programming, these devices can be used to open and shut down gates along with other numerous applications.

#Motorola radio programming software software#

Like the software on your computer, your radio can be programmed and customized to use certain frequencies and support other applications.